Thursday 26 November 2015

(Organic Photovoltaics)OPV Cell

This is a model of a generator being developed by the Georgia Institute of Technology that looks to take advantage of natural air movements in hot areas. When the sun’s heat hits the ground, a layer of hot air forms at ground level. If that ground-level air is hotter than the air above, it can create upwardly moving whirlwind. In nature, this columnar vortex phenomenon creates “dust devils,” or spinning whirlwinds that lift dirt off the ground. In the device, hot air rises through the turbine, generating electricity.
Features of OPV cell
The most unique aspect of the OPV cell devise is the transparent conductive electrode. This allows the light to react with the active materials inside and create the electricity. Now graphene/polymer sheets are used to create thick arrays of flexible OPV cells and they are used to convert solar radiation into electricity providing cheap solar power.
New OPV design:
Now a research team under the guidance of Chongwu Zhou, Professor of Electrical Engineering, USC Viterbi School of Engineering has put forward the theory that the graphene – in its form as atom-thick carbon atom sheets and then attached to very flexible polymer sheets with thermo-plastic layer protection will be incorporated into the OPV cells. By chemical vapour deposition, quality graphene can now be produced in sufficient quantities also.
Differences between silicon cells and graphene OPV cells:
The traditional silicon solar cells are more efficient as 14 watts of power will be generated from 1000 watts of sunlight where as only 1.3 watts of power can be generated from a graphene OPV cell. But these OPV cells more than compensate by having more advantages like physical flexibility and costing less.
More economical in the long run:
According to a team member, it may be one day possible to run printing presses with these economically priced OPVs covering extensive areas very much like printing newspapers. In Gomez’ words – “They could be hung as curtains in homes or even made into fabric and be worn as power generating clothing…. imagine people powering their cellular phone or music/video device while jogging in the sun.”
Advantages of OPVs:
The flexibility of OPVs gives these cells additional advantage by being operational after repeated bending unlike the Indium-Tin-Oxide cells. Low cost, conductivity, stability, electrode/organic film compatibility, and easy availability along with flexibility give graphene OPV cell a decidedly added advantage over other solar cells.

This is a model of a generator being developed by the Georgia Institute of Technology that looks to take advantage of natural air movements in hot areas. When the sun’s heat hits the ground, a layer of hot air forms at ground level. If that ground-level air is hotter than the air above, it can create upwardly moving whirlwind. In nature, this columnar vortex phenomenon creates “dust devils,” or spinning whirlwinds that lift dirt off the ground. In the device, hot air rises through the turbine, generating electricity.

Types of source

  Ideal Voltage Source:  An ideal voltage source is capable to maintain the constant voltage across its terminals. The voltage across the vo...

Translate